024 7509 0133
  • Products

Products

Phos-Prep® PP 30 HT

Phos-Prep® PP 30 HT

PHOS-PREP® PP 30 HT is a fortified, high temp, synthetic lubricant for chains/roller ball bearing chains and conveyors operating in temperatures >300°C, which gives excellent load carrying properties and resistance to corrosive atmospheres. PHOS- PREP® PP 30 HT is very adhesive to metal surfaces even in the presence of large amounts of water and is non-corrosive on steel, copper, bronze, etc. PHOS-PREP® PP 30 HT is H1 compatible.

Phos-Prep® PP 60 S

Phos-Prep® PP 60 S

PHOS-PREP® PP 60 S is an organic Methylene Chloride free paint stripper for the removal of polyester paint finishes from ferrous and non ferrous metal substrates. PHOS-PREP® PP 60 S will remove some epoxy – polyester paints with low epoxy contents).

PHOS-PREP® PP 60 S is safe to use on multi metal applications however we do recommend testing on site to ensure no surface damage occurs to sensitive substrates.

PHOS-PREP® PP 60 S can be used at temperatures from ambient to 60°C.

PHOS-PREP® PP 60 S is based on a high boiling point solvent (b.p 200°C), hence the low volatility when used at a temperature of 50°C C. When blended with alkaline accelerators it is very effective for the removal of polyester paint finishes. Despite being alkaline based the non aqueous formulation of the PHOS-PREP® PP 60 S ensures that there is no attack on aluminium parts.

Phos-Prep® PP 60 A

Phos-Prep® PP 60 A

PHOS-PREP® PP 60 A is a powder flake additive to replenish the active component in the PHOS-PREP® PP 60 A – additions are made based on pH control

Phos-Prep® PP 90 S

Phos-Prep® PP 90 S

PHOS-PREP® PP 90 S is an organic Methylene Chloride free paint stripper for the removal of polyester paint finishes from ferrous and non ferrous metal substrates. PHOS-PREP® PP 90 S will remove some epoxy – polyester paints with low epoxy contents). Has been specially developed for use in the Alloy Wheel refurbishment sector.

PHOS-PREP® PP 90 S is safe to use on multi metal applications however we do recommend testing on site to ensure no surface damage occurs to sensitive substrates.

PHOS-PREP® PP 90 S can be used at temperatures from ambient to 60°C.

PHOS-PREP® PP 90 S is based on a high boiling point solvent (b.p 200°C), hence the low volatility when used at a temperature of 50°C C. When blended with alkaline accelerators it is very effective for the removal of polyester paint finishes. Despite being alkaline based the non aqueous formulation of the PHOS-PREP® PP 90 S ensures that there is no attack on aluminium parts.

Phos-Prep® PP 90 R

Phos-Prep® PP 90 R

PHOS-PREP® PP 90 A is a iquid additive to replenish the active component in the PHOS-PREP® PP 90 A – additions are made based on pH control

Phos-Prep® PP 200

Phos-Prep® PP 200

PHOS-PREP® PP 200 is a concentrated brush-on gel paint, varnish and graffiti remover. Non-flammable Non caustic / non acidic formulation, viscous for use on vertical surfaces, all purpose, water washable, will penetrate several layers

Application: PHOS-PREP® PP 200 is an all-purpose jelly paint stripper that easily removes decorative coatings/finishes such as paints, cellulose, enamel, polyurethane and modern acrylic from all metals and wood. Excellent non-drip characteristics to enable use on vertical surfaces. For industrial use only. PHOS-PREP® PP 200 may also be of use in removing painted graffiti from masonry and unpainted metal and wood.

Method of use: Apply a generous coating of PHOS-PREP® PP 200 using a soft brush or cotton swab. Leave in contact with the painted surface for anything up to 30 minutes, however such long contact times are not normally required. Small items may be dip stripped. Remove softened paint with a wooden scraper and rinse off residue with water. Exceptionally heavy layers of paint may require a second application. Coverage normally 2 – 4 square metres per litre.

Phos-Prep® PP 212

Phos-Prep® PP 212

PHOS-PREP® PP 212 is an Acid activated cold immersion paint stripper which has been developed to overcome the problems associated with more stubborn coatings such as stoved enamel and epoxy polyester powder systems.

PHOS-PREP® PP 212 may be used on both ferrous and non-ferrous metals by breaking down the coating with minimal attack on the base metal; DO NOT use on plastic. This is ideal for jig stripping and rework reclamation where multicoated films encountered require this strong acid accelerator and penetrant blend. Care should be taken when using the PHOS-PREP® PP 212, when in contact with skin please apply a calcium gluconate antidote cream to prevent active ingredients causing severe damage to skin tissue.

Phos-Prep® PP 218

Phos-Prep® PP 218

PHOS-PREP® PP 218 is a HF Meth activated cold immersion paint stripper which has been developed to overcome the problems associated with more stubborn coatings such as stoved enamel and epoxy polyester powder systems.

PHOS-PREP® PP 218 may be used on both ferrous and non-ferrous metals by breaking down the coating with minimal attack on the base metal; DO NOT use on plastic. This is ideal for jig stripping and rework reclamation where multicoated films encountered require this strong acid accelerator and penetrant blend, for example; alloy wheel refurbishment. Care should be taken when using the PHOS-PREP® PP 218, when in contact with skin please apply a calcium gluconate antidote cream to prevent active ingredients causing severe damage to skin tissue.

Phos-Prep® PP 910

Phos-Prep® PP 910

Phos-Prep® PP 910

PHOS-PREP® PP 910 is a replacement for chromate-based products for the pre- treatment of aluminium and aluminium alloys, as well as magnesium and zinc (ie: galvanised surfaces). A very pale yellow / gold surface finish is produced, eliminating the possibility of pre-treatment staining being visible through the final coating. PP910 provides excellent adhesion and corrosion resistance after subsequent painting or powder coating, and requires post rinsing. The process operates at temperatures between 15°C and 35°C, with an immersion time of between two and three minutes. It is also suitable for spray application between 10 and 30 seconds.

Process time is similar to an existing Alochrom process, which means that existing plant layouts or process times do not have to be altered. It eliminates the post rinse stage resulting in no effluent. PHOS-PREP® PP 910 can be used in traditional pre- treatment equipment.

The PHOS-PREP® PP 910 process requires pre-cleaning of the aluminium substrate, either with the company’s PP932 ambient acid etch degreaser or PP933 alkaline aluminium etch degreaser. These products remove the oxides present on the surface to allow the correct conversion reaction to take place and ensure effective bonding of the paint or powder to the treated surface.

Consumption rates for the above products are 10ml/m2 of substrate treated (ie: 100 square metres will use one litre of product). The products PP910, PP932 and PP933 can be used in existing equipment immersion or multi-stage spray application and control is simple with full acid and free acid titration. The processes meet BS6496 and BS EN ISO 12206 2004 (Paint and Varnishes Coatings of Aluminium for architectural purposes) although PTS recommends potential users to undertake independent testing.

Phos-Prep® PP 920

Phos-Prep® PP 920

Phos-Prep® PP 920

PHOS-PREP® PP 920 is a “dry-in-place” replacement for chromate-based products for the pre-treatment of aluminium and aluminium alloys, as well as magnesium and zinc (ie: galvanised surfaces). A very pale surface finish is produced, eliminating the possibility of pre-treatment staining being visible through the final coating. PP920 provides excellent adhesion and corrosion resistance after subsequent painting or powder coating, and requires no post-rinsing. It is said to be ideal for hard water areas. The process operates at temperatures between 15°C and 35°C, with an immersion time of between two and three minutes. It is also suitable for spray application between 10 and 30 seconds.

Process time is similar to an existing Alochrom process, which means that existing plant layouts or process times do not have to be altered. It eliminates the post rinse stage resulting in no effluent. PHOS-PREP® PP 920 can be used in traditional pre treatment equipment as well as vertical cascade systems.

The PHOS-PREP® PP 920 process requires pre-cleaning of the aluminium substrate, either with the company’s PP932 ambient acid etch degreaser or PP933 alkaline aluminium etch degreaser. These products remove the oxides present on the surface to allow the correct conversion reaction to take place and ensure effective bonding of the paint or powder to the treated surface.

Consumption rates for the above products are 10ml/m2 of substrate treated (ie: 100 square metres will use one litre of product). The products PP920, PP932 and PP933 can be used in existing equipment immersion or multi-stage spray application and control is simple with full acid and free acid titration. The processes meet BS6496 and BS EN ISO 12206 2004 (Paint and Varnishes Coatings of Aluminium for architectural purposes) although PTS recommends potential users to undertake independent testing.

Dry-In-Place for aluminium, plus galvanised Zinc and Magnesium.

Phos-Prep® PP 930

Phos-Prep® PP 930

PHOS-PREP® PP 930 Inhibited multi metal cleaner is formulated for the spray or immersion cleaning of steel or hot dip galvanised steel prior to further pre-treatment. The system is designed to produce a chemically clean surface to give uniformity of reaction during subsequent processing. It is particularly suited to spray operations, offers short term corrosion protection on mild steel parts.

Phos-Prep® PP 931

Phos-Prep® PP 931

PHOS-PREP® PP 931 Low foaming cleaner is formulated for the spray or immersion cleaning of steel or hot dip galvanised steel prior to further pre-treatment. The system is designed to produce a chemically clean surface to give uniformity of reaction during subsequent processing. It is particularly suited to spray operations, because of its low foaming characteristics. Extremely efficient in high pressure zones exceeding 18 psi.

Phos-Prep® PP 932

Phos-Prep® PP 932

The PHOS-PREP® PP 932 sulphuric acid based cleaner/etch has been specially formulated to remove scales and tarnish from aluminium to produce a chemically clean surface.

Although PHOS-PREP® PP 932 contains an inbuilt surfactant system, it may be advisable to clean heavily oiled work in PHOS-PREP® PP 934 (an alkali immersion cleaner), followed by a rinse, prior to acid etching. Alternatively, additions of PHOS- PREP® surfactant additives may be added to the PHOS-PREP® PP 932 working bath.

The etch rate from the PHOS-PREP® PP 932 treatment can be varied by adjustments to the immersion time, the bath temperature and bath concentrations. Acid resistant materials such as polypropylene, UPVC or polyethylene are preferred.

The PHOS-PREP® PP 932 bath is normally operated at ambient temperature, at a concentration of 2% to 10% v/v with a process time of 2 to 10 minutes.

For faster process times, or a deeper etched finish, the bath can be operated at stronger concentrations, elevated temperatures or longer process times.

The optimum bath strength should be maintained to produce consistent results. Additions to the bath can be made on the basis of an assessment of the finish of standard of work, or by analysis of bath concentrations.

Following treatment in the PHOS-PREP® PP 932 bath, the work should be adequately rinsed prior to further processing.

Phos-Prep® PP 933

Phos-Prep® PP 933

PHOS-PREP® PP 933 Alkaline Etch Cleaner is formulated for the spray or immersion pre-treatment of aluminium on powder coating plants. The system is designed to produce a chemically clean aluminium surface to give uniformity of reaction during subsequent processing.

PHOS-PREP® PP 933 Alkaline Etch Cleaner is a powder, and a new bath is made up by its addition to warm water to make a bath concentration of between 10 grams/litre and 40 grams/litre, depending on the cleaning and etch rate required.

The solution should be operated at temperatures between 45°C and 70°C. Typical immersion times are 3 to 8 minutes, depending on the amount of etching required.

PHOS-PREP® PP 933 Alkaline Etch Cleaner is designed for plants that have little or no fume extraction.

The process tank and pipe-work may be constructed from mild steel and light metal fittings must be avoided.

Phos-Prep® PP 934

Phos-Prep® PP 934

The PHOS-PREP® PP 934 alkaline based cleaner has been specially formulated to remove heavy oils from aluminium and other metals to produce a chemically clean surface.

Phos-Prep® PP 935

Phos-Prep® PP 935

PHOS-PREP® PP 935 is an acidic cleaner and deoxidiser system designed to ensure a completely clean surface on aluminium, zinc, or steel surfaces before chemical pre-treatment and painting/powder coating. It has been specially formulated to remove scale and white rust.

Phos-Prep® PP 936

Phos-Prep® PP 936

PHOS-PREP® PP 936 is a hydrochloric cleaner and deoxidiser system designed to ensure a completely clean surface on steel & cast iron surfaces. PHOS-PREP® PP 936 is used as an activator before Iron / zinc phosphates such as PHOS-PREP® PP970IZ & PP970M.

PHOS-PREP® PP 936 may be used to remove scale and white rust before chemical pre-treatment and painting/powder coating, when used at 2% in water. Care must be taken on zinc based surfaces not to exceed determined dwell times as removal of the zinc coating will occur.

Phos-Prep® PP 937

Phos-Prep® PP 937

PHOS-PREP® PP 937 is a phosphoric cleaner and deoxidiser system designed to ensure a completely clean surface on steel & cast iron surfaces. PHOS-PREP® PP 937 is used as an activator before Iron / zinc phosphates such as PHOS-PREP® PP970IZ & PP970M.

PHOS-PREP® PP 937 may be used to remove scale and white rust before chemical pre-treatment and painting/powder coating, when used at 2% in water. Care must be taken on zinc based surfaces not to exceed determined dwell times as removal of the zinc coating will occur.

Phos-Prep® PP 938

Phos-Prep® PP 938

To produce a uniformly etched surface on aluminium for anodising or powder coating, it is necessary to effectively clean the work surface. The cleaning process is required to remove magnesium oxide films, cutting oils, finger marks, inks, etc. As by inhibiting the etch reaction they can produce patchy, masked and coarse surfaces.

PHOS-PREP® PP 938 powder cleaner is our strongest alkaline cleaner that consequently will etch the surface of aluminium when operated at high temperatures.

Phos-Prep® PP 940 A

Phos-Prep® PP 940 A

PHOS-PREP® PP 940A Is a REACH approved / compliant gold chrome based pre- treatment for aluminium and alloys for protection and preparation prior to subsequent coatings PHOS-PREP® PP 940A is a single pack solution, for use after either caustic etching or brightening of aluminium, including the processing of aluminium castings.

Phos-Prep® PP 941

Phos-Prep® PP 941

PHOS-PREP® PP 941 Is a REACH approved / compliant clearchrome based pre- treatment for aluminium and alloys for protection and preparation prior to subsequent coatings. PHOS-PREP® PP 941 is a single pack solution for use after either caustic etching or brightening of aluminium, including the processing of aluminium castings.

Phos-Prep® PP 942

Phos-Prep® PP 942

PHOS-PREP® PP 942 The etching or brightening of aluminium can cause formation of a film of smut on the surface, due to insoluble precipitates. The smut must be removed from the surface prior to subsequent processing. Failure to do so can cause discolouration and poor surface appearance. PHOS-PREP® PP 942 is an acidic desmut that is effective after either caustic etching or brightening of aluminium, including the processing of aluminium castings.

PHOS-PREP® PP 975 / 976 / 977 / 979 LT

PHOS-PREP® PP 975 / 976 / 977 / 979 LT

PHOS-PREP® PP 975 / 976 / 977 / 979 LT are detergent additives that as a blend of surfactant specifically formulated for use with PHOS-PREP® products to aid in degreasing and cleaning, PP 976 is soak detergent additive.

The surfactant additives are a sophisticated blend of surfactants specifically formulated for use with spray pre-treatment processes to improve the degreasing capability. It may be used with lightweight iron and zinc phosphates as well as alkaline and acid cleaners.

Phos-Prep® PP 970 IZ

Phos-Prep® PP 970 IZ

PHOS-PREP® PP 970 IZ is a liquid, heavy iron/zinc phosphate process for the treatment of iron and steel.

PHOS-PREP® PP 970IZ produces a phosphate surface with the ability to absorb large quantities of subsequently applied organic products. When sealed with oils in this way the process gives excellent corrosion protection. It is also suitable for rubber bonding.

The process requires direct extraction and is essentially non-hazardous in use when used as directed.

A Class 2 heavy iron / zinc phosphate process that gives a coating weight in excess of 5g/m2, which meets the requirements DEF STAN 03-11/3 Class 1.

For use on IRON or STEEL:

  • Less frequent tank changes
  • Easy to maintain
  • Single Pack Liquid
  • Ease of handling and control makes it less prone to mistakes in use
  • Short process time
  • Increase throughput
  • Lower operating costs from lower temperature of 60 C when processing cast iron
  • A highly concentrated formula chemical usage

Phos-Prep® PP 970 M

Phos-Prep® PP 970 M

Phos-Prep® PP 970 M

PHOS-PREP® PP 970 M is a liquid, heavy iron/manganese phosphate process for the treatment of iron and steel. It has excellent anti-galling properties and the finish is suitable for offshore and automotive applications.

A Class 1 iron-manganese phosphate that gives a coating weight < 7g/m2, which meets the requirements DEF STAN 03-11/3 Class 1.

The fine uniform crystal structure acts as an ideal lubricant carrier for running in applications.

PHOS-PREP® PP 970 M produces a phosphate surface with the ability to absorb large quantities of subsequently applied organic products. When sealed with oils in this way the process gives excellent corrosion protection.

The process requires direct extraction and is essentially non-hazardous in use when used as directed.

PHOS-PREP® PP 970 M is a single pack, concentrated, cost-effective and low maintenance liquid. Low chemical usage and an easy handling process saves time and reduces opportunities for mistakes, thereby increasing production and reducing operating overhead.

Low sludge reduces disposal costs while making your company a good environmental steward.

Phos-Prep® PP 971 T

Phos-Prep® PP 971 T

Phos-Prep® PP 971 T

A completely chromium-free conversion coating. This clean technology product is a direct replacement for traditional pre-treatments on aluminium, mild steel and zinc based substrates.

PHOS-PREP® PP 971 T is a zirconium/titanium based single-stage process, which runs like a conventional iron phosphate conversion coating. It has been shown in independent tests to provide up to a 1000 hours neutral salt spray on iron and steel, and 3000 hours on aluminium, when used with a rinse seal PHOS-PREP® PP 973.

PHOS-PREP® PP 971 T is accelerated and gives a very high conversion coating efficiency. This ensures minimal removal of material from the metal surface resulting in very low levels of sludge and a long bath life (up to three years) – Bath consumption is as much as 50% less than traditional phosphate baths. Only weekly checking and infrequent replenishment is required. Solution concentrations are easily controlled by simple titration. Due to the high efficiency of the product, energy requirements are also reduced. VOC, BOD and COD emissions are also minimised.

An advanced chrome-free, multi-metal pre-treatment technology to replace high cost and ecologically harmful iron and zinc phosphates.

The product is suitable for either soak or spray application and as the product may be used as a combined cleaner coater process (Separate cleaning-stage is eliminated). This reduces process time, cost, and increases throughput. The resulting conversion coats are resistant to high temperature accelerated adhesion test – heating in water to 125°C for 2 hours giving no loss of topcoat adhesion. (When PP 932 pre etch is used)

Early users of PHOS-PREP® PP 971 T include automotive components, shop fittings, medical cabinet manufacturers, powder coating subcontractors and architectural aluminium manufacturers. The conventional iron and zinc phosphate process has been replaced with this new clean technology process and have resulted in production benefits, with improved surface coating performance.

Environmental Benefits

PROPERTY PHOS-PREP PP 971 T IRON PHOSPHATE ZINC PHOSPHATE
Low chemical usage 0.5-2% 4% 3%
Low operating temperature 35-60℃ 50℃ 60℃
Long bath life 3 years 3 months 4 months
Sludge build up No Yes Yes
Contains chrome No No/Yes Yes
Single state cleaning and phosphate Yes No/Yes No
Multi metal process Yes No No
Coverage per litre of product 100 – 250M² 100M² 100M²

Phos-Prep® PP 972 LT

Phos-Prep® PP 972 LT

PHOS-PREP® PP 972 LT is a low temperature < 30°C, version of the PP 971T – complete chrome free conversion coating for use on aluminium extrusions, aluminium and white metal engineered parts, aluminium coil, steel and zintec to greatly enhance corrosion protection and adhesion of subsequently applied coatings. This ensures the absolute minimum removal of aluminium from the metal surface during the conversion coating, which gives low levels of sludge and long bath life. PHOS- PREP® PP 972 LT is a fully built product which cleans and conversion coats in a single stage, followed by a water rinse & dry off – greatly reducing process times and cost. Product concentrations are easily controlled by simple titration or by conductivity or pH. The resulting conversion coats are resistant to high temperature accelerated adhesion test – heating in water to 125°C for 2 hours giving no loss of topcoat adhesion. (When PP 932 pre etch is used)

Phos-Prep® PP 973 / 993 / PHOS-SEAL

Phos-Prep® PP 973 / 993 / PHOS-SEAL

PHOS-PREP® PP 973 / 993 / PHOS-SEAL are non-chrome final rinse that is formulated for use in the final stage of conventional spray or immersion phosphate systems. PP 973 / PP 993 has shown significant improvements over conventional chrome and non-chrome rinses in humidity and salt spray performance on a variety of substrates.

Phos-Prep® PP 978

Phos-Prep® PP 978

PHOS-PREP® PP 978 is a surfactant additive to reduce the build-up of foam, when spray & immersion baths are agitated they generate high levels of foam due to operating bath solutions at temperatures lower than 30°C.

PHOS-PREP® PP 978 will reduce the surface tension of the process bath, and after addition of PHOS-PREP® PP 978 the level of foam build up will gradually reduce. Should the processes bath temperatures continually be lower than recommended, regular additions of PHOS-PREP® PP 978 should be made with standard process solutions.

Phos-Prep® PP 981 / 982

Phos-Prep® PP 981 / 982

PHOS-PREP® PP 981 has been specially formulated to produce quality preparation coatings on steel and galvanised steel surfaces prior to painting, at temperatures of 35° C

PHOS-PREP® PP 981 solution produces a medium weight uniform zinc preparation conversion coating which gives excellent adhesion and flexibility whilst providing salt spray, detergent and humidity resistance.

PHOS-PREP® PP 981 is supplied as a single pack green coloured liquid for galvanised steel and as a two pack product for plain steel surfaces.

PHOS-PREP® PP 981 is suitable for both spray and immersion processes.

Phos-Prep® PP 983 LC

Phos-Prep® PP 983 LC

Phos-Prep® PP 983 LC

PHOS-PREP® PP 983 LC is used when steel is cut using the laser method. A carbon deposit is left upon the edge of the surface as a by-product. If not removed, the powder coat will result in paint adhesion failure on the edge of the component.

Pre-Treatment Solutions Ltd, developed a pre-treatment process that will remove all loose scale and leave the edge with a phosphate to maximise paint adhesion. It can be used in conventional spray lines or immersion systems.

PHOS-PREP® PP 983 LC is a degreaser specifically engineered for Laser Cutting Applications

PP983LC will eliminate:

  • Poor edge adhesion for powder coating
  • Labour intensive ‘fettling’ of edges to achieve good powder adhesion

PHOS-PREP® PP 983 LC does:

  • Reduce part rejects to decrease operating costs
  • ‘Drop in’ as a replacement for conventional iron phosphate processes
  • Retain degrease and phosphate properties
  • Operate at low temperature 35-40°C
  • Have a long bath life
  • Work on mulit-metal including mild steel and galvanised steel in any order and quantity
  • Stainless steel process equipment required

Phos-Prep® PP 984

Phos-Prep® PP 984

PHOS-PREP® PP 984 phosphate has been specially formulated to produce phosphate coatings on steel, zinc and aluminium surfaces prior to; powder coating, wet painting, and Anodic and Cathodic (E Coat) processes.

The PHOS-PREP® PP 984 solution produces a medium weight uniform zinc phosphate conversion coating which gives excellent adhesion and flexibility whilst providing salt spray, detergent and humidity resistance after painting.

PHOS-PREP® PP 984 is supplied as a single pack liquid system and is suitable for both spray and immersion processes. Additive packs are available for the system, the use of which are advised for processing aluminium alloys and when acidity regulation is necessary.

Operating the PHOS-PREP® PP 984 will produce uniform phosphate coatings, with coating weights of between 1 and 5 g/m2, assuming uniform processing conditions.

The PHOS-PREP® PP 984 will offer performance > 1000 hours on subsequent paint applications in compliance to BS117 Neutral Salt Spray testing.

Phos-Prep® PP 990

Phos-Prep® PP 990

PHOS-PREP® PP 990 Phosphate is designed to clean and produce, in one operation, a lightweight Zinc Phosphate coating on steel by spray application. Phosphate coating weights of 1.5 – 2 g/m2 would normally be expected.

PHOS-PREP® PP 990 Phosphate is designed to operate at 45 – 50°C, and is specially designed for operation in a purpose built washing machine. It incorporates an integral surfactant system.

It may also be used as the first stage of a two, three or four stage spray pre-treatment process.

The phosphate coating produced significantly improves the durability and adhesion of subsequently applied paint films, compared to untreated surfaces, at minimum pre- treatment costs.

Phos-Prep® PP 991

Phos-Prep® PP 991

PHOS-PREP® PP 991 is a sophisticated, high coating weight, iron phosphate process. It will simultaneously degrease and phosphate with its built in detergent system. PHOS-PREP® PP 991 is a multi-metal process that will produce phosphate coatings on aluminium, galvanised steel, mild steel and zintec.

When painted with either powder coating or conventional wet paint systems the corrosion resistance is superior to that of a conventional pre-treatment process. 1000 hours neutral salt spray to ASTM B 117 has been achieved.

The process gives a coating weight of between 0.8 and 1.2 g/m2., which meets the requirements of BS3189: 1973 Type 4 and DEF STAN 03-11/1 Class 4.

A Heavy Iron phosphate that gives a coating weight of between 0.8 and 1.2 g/m2., which meets the requirements of BS3189: 1973 Type 4 and DEF STAN 03-11/1 Class 4.

Phos-Prep® PP 992 / 995

Phos-Prep® PP 992 / 995

PHOS-PREP® PP 992 / 995 are liquid, low temperature, lightweight iron phosphate process deigned to simultaneously degrease and phosphate in one operation. The process will treat iron, steel, zinc and aluminium in mixed metal production.

PHOS-PREP® PP 995 has been developed with a built-in inhibitor, this allows the process to be used in single stage washing machine eliminating the water rinse stage.

PHOS-PREP® PP 995 produces a phosphate surface which when finished with an organic coating substantially increases the adhesion and durability when compared with conventional alkali or solvent cleaned surfaces.

The process gives a coating weight of between 0.2 and 0.5 g/m2., which meets the requirements of BS3189: 1973 Type 4 and DEF STAN 03-11/1 Class 4.

PHOS-PREP® PP 995 is suitable for both spray and immersion applications.

A Light Iron phosphate that gives a coating weight of between 0.2 and 0.5 g/m2., which meets the requirements of BS3189: 1973 Type 4 and DEF STAN 03-11/1 Class 4.

Phos-Prep® PP 993

Phos-Prep® PP 993

Phos-Prep® PP 994

Phos-Prep® PP 994

Phos-Prep® PP 996

Phos-Prep® PP 996

PHOS-PREP® PP 996 Aluminium accelerator is added to process solutions where by additional etching of the aluminium or zinc based surface is required, thus aiding in the removal of natural oxides that may be present on the substrate.

Phos-Prep® PP Barrier Coat BC100 / BC300

Phos-Prep® PP Barrier Coat BC100 / BC300

PHOS-PREP® BC100

PHOS-PREP® BC100 is a water-soluble barrier coat, formulated for use in Pressure Type Mask Washers. The removal of solvent-based paint is dependent on barrier concentration, heat, impingement and tooling condition.

The recommended use concentration is between 90g and 180g of PHOS-PREP® BC100 per litre of water. The temperature should be between 80°C and 91°C, depending on the type of paint being removed.

ADVANTAGES

  • Completely soluble and resoluble to minimise build-up of unwanted deposits on machinery and tooling
  • Barrier coat can be removed completely with warm water to allow tool repair
  • Completely bio-degradable

PHOS-PREP® BC300

PHOS-PREP® BC300 is a water-soluble barrier coat, formulated for use in Pressure Type Mask Washers. This product is specially formulated for use with water borne paints, but can also be used with most solvent-borne paints. The removal and filtration of paint is dependent on barrier concentration, heat, impingement and tooling condition.

The recommended use concentration is between 90 and 180g of PHOS-PREP® BC300 per litre of water and the temperature should be between 82°C and 88°C. We recommend the use of De-ionised water, but this product can be used with tap water.

ADVANTAGES

  • Completely soluble and resoluble to minimise build-up of unwanted deposits on machinery and tooling
  • Barrier coat can be removed completely with warm water to allow tool repair
  • Completely bio-degradable

Phos-Prep® PP HYD 306 / NRB / 300HD

Phos-Prep® PP HYD 306 / NRB / 300HD

HYD 306 / NRB / 300HD are additives to rinse waters used in pre-treatment process where contamination may occur – PTS advises the use of the HYD products to be taken with extreme caution as the products supplied as biocides.

Phos-Prep® PP DM1

Phos-Prep® PP DM1

PHOS-PREP® PP DM1 is an alkaline additive to increase the pH of phosphate solutions before disposal, as well as being used for the regeneration of ion cylinders in a DI system

Phos-Prep® PP Hcl 32%

Phos-Prep® PP Hcl 32%

PHOS-PREP® PP 32% is an acidic additive to decrease the pH of solutions before disposal, as well as being used for the regeneration of ion cylinders in a DI system

Phos-Prep® PP EB1

Phos-Prep® PP EB1

PHOS-PREP® PP EB 1 Pigment is a water based polymer sealer used in conjunction with the PHOS-PREP® PP 981 / PP 982 EB Preparation. To allow a fully protected aesthetic pleasing appearance on finished engineered parts, that allows a dry to touch surface offering excellent corrosion properties with minimal dimensional change.

Phos-Prep® PP TW40

Phos-Prep® PP TW40

PHOS-PREP® PP TW-40 is a clear blue solution that is applied to galvanised steel to improve the adhesion of paint or powder coatings. It has been specially formulated to be an equivalent system to the ‘T’ Wash product developed as mordurn solution, but with an improved solvent balance to enhance performance.

Phos-Prep® PP RPTS

Phos-Prep® PP RPTS

PHOS-PREP® PP RPTS is a industrial / residential radiator pressure test solution used to identify leaks when radiators are working under normal working pressures.

Phos-Prep® PP SADS

Phos-Prep® PP SADS

PHOS-PREP® PP SADS is an inhibited acidic de scale & cleaner system designed to aid the cleaning and removal of phosphate build up in pre-treatment process equipment. Normally used to de scale when replacing process solutions or generally servicing pre-treatment spray washing machines. PHOS-PREP® PP SA DS is inhibited to prevent acidic attack to mild steel equipment.

Phos-Prep® PP T SEAL

Phos-Prep® PP T SEAL

PHOS-PREP® PP T SEAL is a mineral fluid base that is used to minimise evaporation of solvents from room temperature paint stripping solutions such as PP 212 / PP 218 – that contain hazardous ingredient for the user and environment.

Phos-Prep® PP IPW (Easy to Use hand wipes in a tub)

Phos-Prep® PP IPW (Easy to Use hand wipes in a tub)

PHOS-PREP® PP IPW are a range of impregnated hand wipes, that come prepared with Iron phosphate / Zirconium / T wash / Low solvent / to prepare a variety of substrates where on line preparation is not possible. 150 wipes per container.

Phos-Prep® PP Finsol

Phos-Prep® PP Finsol

PHOS-PREP® PP Finsol solutions are a fine blend of solvents for cleaning aluminium prior to a finning operation

Phos-Prep® PP VMA & VMC

Phos-Prep® PP VMA & VMC

PHOS-PREP® PP VMA & VMC are powder products, specifically designed for use as a pre-dip before Class 1 manganese type phosphate processes allowing work to be alkali cleaned and/or acid pickled, producing a fine grain coating similar to that obtained after solvent degreasing. It is a 2 pack product used in a ratio of 1: 1

Phos-Prep® PP AFS 1

Phos-Prep® PP AFS 1

PHOS-PREP® PP AFS 1 is a additive for suppressing foam build up is water back based spray booths in paint shops

Phos-Prep® PP DW33

Phos-Prep® PP DW33

PHOS-PREP® PP DW 33 is dewatering oil with short to medium term storage properties fast acting in removal of water from wet surfaces, ideal for sealing heavy weight phosphate coatings for improved protection.

Hydrocarbon Detection Strips for Oil Testing

Hydrocarbon Detection Strips for Oil Testing

Hydrocarbon Detection Strips for oil testing & detection can quickly and accurately determine the presence of hydrocarbons in water.

PRODUCT DESCRIPTION: The Hydrocarbon Detection Strips can quickly and accurately determine the presence of hydrocarbons in water. When the Hydrocarbon Detection Strip is introduced into a potential hydrocarbon situation, the light blue strip will turn a darker blue if hydrocarbons are present. The colour intensity and size of the darker blue areas are indicators of the quantity of hydrocarbons contained in the sample. If the sample contains no hydrocarbons, the strip will not moisten or discolour.

PRODUCT APPLICATIONS: Hydrocarbon Detection Strips can be used to detect hydrocarbon contaminated water in elevator shafts, underground utility vaults and manholes, retention and secondary containment vessels, and out-fall on oil water separators prior to pumping out the water.

Get in touch!