Phos-Prep, the modern solution for Pretreatment.

 

PP983LC is used when steel is cut using the laser method.   A carbon deposit is left upon the edge of the surface as a by-product.  If not removed, the powder coat will result in paint adhesion failure on the edge of the component. 

 

PreTreatment Solutions Ltd has developed a pre-treatment process that will remove all loose scale and leave the edge with a phosphate  to maximise paint adhesion.  It can be used in conventional spray lines or immersion systems.

 

PP983LC will eliminate:

 

· Poor edge adhesion for powder coating

· Labour intensive ‘fettling’ of edges to achieve good powder adhesion.

 

PP983LC does:

 

· Reduce part rejects to decrease operating costs.

· ‘Drop in’ as a replacement for conventional iron phosphate processes.

· Retain degrease and phosphate properties.

· Operate at low temperature 35 - 40^oC

· Have a long bath life.

· Work on multi-metal including mild steel and galvanised steel in any order and quantity.

· *Stainless steel process equipment required.

PP983LC is a degreaser specifically engineered for Laser Cutting Applications.

Think Green!

Product List